What is aluminum pcb material?
Aluminum substrate material refers to a type of printed circuit board (PCB) that uses aluminum as its base material.
The aluminum substrate is a thin layer of aluminum that is laminated onto a non-conductive material,
such as fiberglass or ceramic, to create a rigid and durable circuit board.
This arrangement is made so that the heat can dissipate through the metal core and transmit to the chassis.
Most of the LED or analog devices are populated with considerably larger boards.
The surface of the boards finishes by dissipating the heat.
While using the MCPCBs, it is obliged to take proper caution because it is constructed with some complex and complicated metal layers laminated with FR4 based on glass material.
The chemistry for lamination differs while the board is fabricated.
If the board is bonded properly then there might be voids below the lamination and caution is necessary.
The dissipated fixture of heat is anticipated from the metal core which is needed to be defined and designed carefully.
Applications Of aluminum pcb material
The technology of the metal core PCB is ideal for its applications that generate immense heat and have difficulty being cool down using conventional fans or other cooling methods.
MCPCBs play an integral role to achieve a high illumination with fewer requirements than LEDs require.
The fabrication process of metal core PCB is helpful for the applications
Since the MCPCBs are most often used in LED technologies for producing a certain illumination the light-emitting diodes releases the heat in applications like:
– General lighting
– Automotive systems
– Industrial, telecom, power supplies, and high voltage regulators types of power converters
– Street safety lightings and streetlights
– Backlight applications
Military and aerospace are another two other sectors appropriate to utilize the benefits of metal core PCBs in their applications.
These sectors are quite sensitive and need to endure frequent thermal cycling, limits of temperature and humidity, along with repeated mechanical shocks.
The MCPCB deals according to the operational requirements only if better structural veracity and thermal conductivity enabling withstanding greater shocks.
The higher the conductivity of thermal, the better it is for the temperature distribution throughout the boards as it ensures a uniform for thermal cycling.
It also stops forming hot spots before near to the active components.
Other than these, MCPCB works great in solar panels and motion control applications.
The combination of a metal core with HDI PCB technology can create an advanced circuit technology including microwave RF PCB, flex PCB, and rigid-flex PCBs.
As the demand for PCBs is high due to the remarkable benefits, the metal core PCB is the most widely used one among all the others.
It ensures high circuitry density, thermal management, and enhanced reliability for enhanced performance.
Thermal conductivity of 2 Layers thermal Pad MPCB
Thermal pad area is 385 W/m.k
Capability of Metal core PCB
|Metal core PCB Capability|
|Board thickness||Maximum (mm)||3.0||5.0|
|Panel size||Maximum (mm)||600×1170||/|
|Layer count||Aluminum PCB||1-8L||10 L|
|Copper PCB||1-8L||10 L|
|Thermal Conductivity||Aluminum PCB(w/m.k)||0.8 to 12|
|Drilling||Minimum drill diameter (mm)||1.0||0.8|
|2 Layer ALPCB Via||0.3||/|
|Other brand per customer||Yes||/|
|Final finishing||HASL Lead Free||Yes||/|
2 Layers direct thermal path copper core pcb application
2 Layers direct thermal path copper core pcb are designed to dissipate heat generated by high-power LEDs,
which helps to increase the lifespan of the LED and improve its performance.
The aluminium base acts as a heat sink, which absorbs and dissipates the heat generated by the LED.
The 2 Layers direct thermal path copper core pcb is made by laminating a thin layer of copper onto an copper substrate.
The copper layer is then etched to create the circuit pattern.
2 Layers direct thermal path copper core pcb for LED lighting applications are available in various sizes and thicknesses, depending on the specific requirements of the application.
They are also available in single-sided, double-sided, and multi-layered configurations.
About Andwin MCPCB
Andwin Ciurcuits MCPCB davision set up on Feb. 2006.
Focus on providing metal core PCB for customer
In LED field and power supply field.
We can meet all your MCPCB manufacturing needs,
From single-sided Aluminum to
complex multilayered metal clad substrate PCBs
And from prototype through production.
The following is a list of the services and products